Skip to content
  • There are no suggestions because the search field is empty.

Controller basics

Use your controller to interact with the VR environment.

Pico Neo 3

WARNING: Learners can unpair controllers with button combinations. If a controller becomes unpaired from the headset, you will need to contact Strivr support. Make sure learners do not hold down home + pause or home + trigger for more than 4 seconds.
  • To move in the virtual environment, use the thumbstick.
  • To select menu items and interactive elements, pull the trigger button.
  • To grab objects in the virtual environment, use the grip button.
  • To pause, use the back  button.
  • To exit to the menu, use the home  button.
  • To recalibrate (re-center) the display, press and hold the home  button for 2 seconds.
  • If a controller is disconnected, press the home  button to wake it.
  • If a controller becomes unpaired, contact support.


    Pico G2 and 4KS

    • To select menu items and interactive elements, pull the trigger button.
    • To pause, use the back  button.
    • To exit to the menu, use the home  button.
    • To recalibrate (re-center) the display, press and hold the home  button for 2 seconds.
    • If you need to re-sync the controller at any time, make sure the headset is nearby and then press and hold the home  button until a light starts to blink on the controller (about 5 seconds.) When the blinking stops it is reconnected.

     


    Oculus Go

    • To select menu items and interactive elements, pull the trigger button
    • To pause, use the back  button.
    • To exit to the menu, use the home  button.
    • To recalibrate (re-center) the controller, press and hold the Home button for two seconds.
    • If you need to re-sync the controller at any time, make sure the headset is nearby and then press and hold both the Back button and the Home button at the same time until a white light starts to blink on the controller. When the blinking stops it is reconnected.